Brush rake, brush grapple, landscape rake, hard ground and driveway ripper all in one unit
Stump and brush grapple for skidsteer is about 6 feet wide and has 7 adjustable length tines on the bottom and 6 adjustable length tines in the top grapple.
- Each of the 7 bottom tines can be independently set to 5 different lengths or heights from main frame and each is secured with (2) 3/4 inch diameter bolts.
Great for changing it from a brush grapple to stump pusher and ripping or scarifiering compacted soil and severely compacted crushed rock. it's a ripper.
- Each of the 6 top tines can be independently set to 5 different lengths or heights
- Grapple is available in other widths and sizes. 4 foot to 10 feet wide.
- Grappler's adjustable tines are 3/4 inch thick and 3" wide.
- Landscape rake, small compacted rock and gravel ripper & brush grapple.
- Optional hitches for a wide variety of loaders such a John Deere, Case, New Holland, Kubota, Euro, Global, ALO plus others
Uses
- Debris Grapple
- Landscape Rake
- Ripper or Scarifier
- Adjustable ripper tines have replaceable teeth
- Here it is ripping road rock that is set up almost like concrete. This Road needed to be lowered a few inches for proper water drainage. The adjustable length ripper tines were adjusted so that only the center tine would penetrate.
The driveway we have was so hard, we did not have enough power to dig with more than one tine on the initial passes. The compacted crushed limestone came up in chunks like concrete.
- This unit is heavy duty enough to power out this 55 hp Case 1845c uni-loader with tracks without any damage to the ripper tooth or framework. After several quick parallel passes about 1 foot apart we were able to level the road to grade with the material bucket. Also see it used as a brush grapple. 800 283 7107 or 417 682 5551
landscape rake and gravel road ripper brush grapple
Videos
800 283 7107 or 417 682 5551
